How do I replace the rollers on the 8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT?
If one of the rollers is broken, it must be replaced quickly so that it does not affect the operation of the 8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT and does not cause the 8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT to wear out more quickly.
The tools to use
To replace the roller, you will need :
- Allen key
- Phillips screwdriver
Spare parts
Please find attached the link to purchase the front roller for the 8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT: https://8streme.eu/produit/ensemble-du-rouleau-avant-gris-et-noir-71150/
Please find enclosed the link to purchase the rear roller with gear ROBOT PISCINE 8STREME 7310, 8STREME 7320 : https://8streme.eu/produit/ensemble-de-tubes-a-rouleaux-dengrenage-noir-71090/
Be careful to determine which of your rollers is broken, as the front and rear rollers are different.
The replacement procedure
We recommend you follow the video tutorial to replace the roller.
Link to the dismantling of the rollers of the ROBOT PISCINE 8STREME 7310, 8STREME 7320 : https://www.youtube.com/watch?v=BEJbVVmLMVM&list=PLWoiTHw_wDWv8tDa7QGiQrazACbyhJHXd&index=8
Link to the assembly of the rollers of the ROBOT PISCINE 8STREME 7310, 8STREME 7320 :
https://www.youtube.com/watch?v=mU-q6TRrOO8&list=PLWoiTHw_wDWv8tDa7QGiQrazACbyhJHXd&index=9
The first step is to unplug your 8STREME 7310, 8STREME 7320 POOL ROBOT before proceeding with any replacement.
Open the lid of your food processor and remove the filter basket by pulling on the basket handles.
To remove the roller, simply unscrew the four Allen screws with an Allen key located in the corners inside the robot. Turn the robot over and unscrew the two small screws on the two outer wheels and remove the two wheels.
Then remove the four screws holding the robot base and lift it out by pulling on both sides.
Once you have the base in your hand, unscrew the screws from the gears. If you need to replace a single roller, unscrew only the two screws on the two wheels attached to that roller. If you need to replace both rollers, unscrew all four screws from all four gears.
Lift the side support by pulling on both sides. Remove the roller to be changed.
Keep all the parts to one side.
To fit the new roller, locate the reverse side of the roller and the position of the front and back.
Fit the roller into the hole in the gearwheel. Once the roller has been fitted, check that when the roller is turned, the wheel also turns. Fit the second side support with the two wheels and the belt. Check that the wheel also turns when the roller is turned. Then tighten the wheel screws.
If you're having trouble fitting the track, check out this link to the installation and removal of drive belts: https://www.youtube.com/watch?v=_O9krQNSCio&list=PLWoiTHw_wDWv8tDa7QGiQrazACbyhJHXd&index=2
Once the base has been reconstituted, replace it on the robot shell in the correct direction. Tighten the four screws holding the base to the robot shell. Replace the two castors with their plastic supports and tighten the two small screws.
Turn the robot right side up and screw the four Allen screws back into the robot.
Contact your dealer or the after-sales service
If you have any problems replacing the drive belts, please contact your dealer or the after-sales service.
8STREME Customer Service contact information :
8STREME After-Sales Service
6 RUE DES FRERES MICHELIN
10600 LA CHAPELLE SAINT LUC
FRANCE
03 10 64 60 26