When the motor block is worn or breaks down, they must be changed quickly so that this does not affect the operation of the SWIMMING POOL ROBOT 8STREME 5200-J2X, 8STREME 5210-J200, 8STREME 5212, 8STREME 5220-LUNA 10, 8STREME 5222 and does not cause faster wear of the SWIMMING POOL ROBOT 8STREME 5200-J2X, 8STREME 5210-J200, 8STREME 5212, 8STREME 5220-LUNA 10, 8STREME 5222.

The tools to use

To replace the roller, you will need :

• Phillips screwdriver
• An engine key

Spare parts

Please find attached the link to purchase the engine block for the 8STREME 5200-J2X SWIMMING POOL ROBOT: https://8streme.eu/produit/moteur-de-pompe-pour-robot-5200-j2x-51061/

Please find attached the link to purchase the motor block for the 8STREME 5210-J200, 8STREME 5212 SWIMMING POOL ROBOT: https://8streme.eu/produit/moteur-de-pompe-pour-robot-5212-51071/

Please find attached the link to purchase the motor unit for the 8STREME 5220-LUNA 10, 8STREME 5222 SWIMMING POOL ROBOT: https://8streme.eu/produit/moteur-de-pompe-51200/

The engine key will be inserted in the package.

The replacement procedure

We recommend you follow the video tutorial to replace the engine block.

Link to the replacement motor for the ROBOT PISCINE 8STREME 5200-J2X :

Remove the motor : https://www.youtube.com/watch?v=SBlBmxTYrV4&list=PLWoiTHw_wDWuyX-0fggC-UzWEwVnIynCi&index=2

Refit the engine : https://www.youtube.com/watch?v=7Ky8s4CO8Gc&list=PLWoiTHw_wDWuyX-0fggC-UzWEwVnIynCi&index=3

Link to the replacement motor for the 8STREME 5210-J200, 8STREME 5212 SWIMMING POOL ROBOT:

Remove the motor : https://www.youtube.com/watch?v=5oqd4T7P8no&list=PLWoiTHw_wDWs7Ki4BXYGA3rXJjyFkgSsK&index=5

Refit the engine : https://www.youtube.com/watch?v=p1HqmWG7n3w&list=PLWoiTHw_wDWs7Ki4BXYGA3rXJjyFkgSsK&index=1

Link to the replacement motor for the 8STREME 5220-LUNA 10, 8STREME 5222 SWIMMING POOL ROBOT:

Remove the motor : https://www.youtube.com/watch?v=f-RUKFvWmcU&list=PLWoiTHw_wDWui0WuFoqDcDC5flkTzWiag&index=4

Refit the engine : https://www.youtube.com/watch?v=mNgH9Fc_UEU&list=PLWoiTHw_wDWui0WuFoqDcDC5flkTzWiag&index=3

The first step is to disconnect your ROBOT POOL 8STREME 5200-J2X, 8STREME 5210-J200, 8STREME 5212, 8STREME 5220-LUNA 10, 8STREME 5222 before proceeding with any replacement.

To dismantle the motor, unclip the floating cable above it by removing the two small plastic plugs.

Remove the pump outlet valves on each side by unscrewing the three small screws.

Open the food processor by pressing the push button on the front of the processor, then lift the lid until you hear a "click" on the hinges to lock the lid in place.

Then remove the two screws holding the pump motor in place and pull the motor out. 

Unscrew the black motor nut using the motor key and remove the floating cable.

Keep all the parts to one side. 

To fit the new motor, plug the floating cable into the new motor unit and screw the black nut onto the motor using the motor key.

Replace the motor unit in the robot in the correct direction. The arrow on the motor must face upwards when you replace the motor.

Tighten the two screws holding the motor unit in place.

Close the robot, then replace the pump outlet valves by tightening the three small screws.

Then replace the floating cable and the two small plastic plugs.

Contact your dealer or the after-sales service

If you have any problems replacing the drive belts, please contact your dealer or the after-sales service.

8STREME Customer Service contact information :

8STREME After-Sales Service

6 RUE DES FRERES MICHELIN

10600 LA CHAPELLE SAINT LUC

FRANCE

03 10 64 60 26

[email protected]