How do I replace the motor unit in the 8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT?
When the motor block is worn or breaks down, it must be replaced quickly so that it does not affect the operation of the 8STREME 7310, 8STREME 7320 POOL ROBOT and does not cause the 8STREME 7310, 8STREME 7320 POOL ROBOT to wear out more quickly.
The tools to use
To replace the roller, you will need :
- Allen key
- Phillips screwdriver
- A flathead screwdriver
- An engine key
Spare parts
Please find attached the link to purchase the engine block: https://8streme.eu/produit/bloc-moteur-de-la-pompe-71050/
The engine key will be inserted in the package.
The replacement procedure
We recommend you follow the video tutorial to replace the engine block.
8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT motor disassembly link: https://www.youtube.com/watch?v=-q-rfdu2Wy8&list=PLWoiTHw_wDWv8tDa7QGiQrazACbyhJHXd&index=3
8STREME 7310, 8STREME 7320 SWIMMING POOL ROBOT motor assembly link:
https://www.youtube.com/watch?v=ItmaF-YrXz4&list=PLWoiTHw_wDWv8tDa7QGiQrazACbyhJHXd&index=4
The first step is to unplug your 8STREME 7310, 8STREME 7320 POOL ROBOT before proceeding with any replacement.
Open the lid of your food processor and remove the filter basket by pulling on the basket handles.
To dismantle the motor, simply unscrew the four Allen screws using an Allen key located in the corners inside the robot. Turn the robot over and unscrew the two small screws on the two outer castors and remove the two castors.
Then remove the four screws holding the robot base and lift it out by pulling on both sides.
Once the base has been removed, unscrew the three screws holding the motor unit in place.
Turn the robot right side up, and unclip the motor grill on the top using a flathead screwdriver.
Open the cover and remove the motor unit by lifting it up and tilting it outwards.
Unscrew the black nut on the engine block using the engine key, then remove the floating cable from the engine block.
Keep all the parts to one side.
To fit the new motor, plug the floating cable into the new motor unit and screw the black nut onto the motor using the motor key.
Replace the motor block in the robot and turn the robot upside down.
Tighten the three screws holding the motor unit in place.
Replace the base on the robot shell in the correct direction. Tighten the four screws holding the base to the robot shell. Replace the two castors with their plastic supports and tighten the two small screws.
Turn the robot right side up and screw the four Allen screws back into the robot.
Re-clip the motor grille, taking care to reposition the black cable seal where it should be on the grille.
Contact your dealer or the after-sales service
If you have any problems replacing the drive belts, please contact your dealer or the after-sales service.
8STREME Customer Service contact information :
8STREME After-Sales Service
6 RUE DES FRERES MICHELIN
10600 LA CHAPELLE SAINT LUC
FRANCE
03 10 64 60 26